KNX DALI-2 Gateway 2gang Secure
Referenznummer: 64546021
The DALI gateway with integrated DALI power supply forms the interface between a KNX installation and a digital DALI (Digital Addressable Lighting Interface) lighting system. Depending on the device variant, the gateway enables the switching and dimming of DALI operating devices in either one DALI system (1 x 64 operating devices, 1gang device variant) or in two separate DALI systems (2 x 64 operating devices, 2gang device variant).
DALI operating devices can be controlled in terms of their brightness, colour temperature and colour (RGB(W)). The devices also support Human Centric Lighting (HCL) for maximum well-being and comfort.
DALI sensors such as DALI push-buttons, push-button control units, rotary controls, sliders, presence detectors and brightness sensors can also be integrated. These DALI sensors can be used to control DALI operating devices or KNX actuators.
Product features
- DALI-2 certified
- Control of up to 64 DALI devices in up to 32 groups ("1gang" device variant)
- Control of max. 2x 64 DALI devices in max. 2x 32 groups ("2gang" device variant)
- Multi-master capable; DALI-2 sensors can be used as application controllers
- DALI-2 sensors are supported as input devices in instance mode
- Integration of a Casambi system in KNX possible using an additional Casambi DALI gateway
- Setting the colour temperature or light colour (RGB, RGBW) for luminaires with DALI Device Type 8 in accordance with IEC 62386-209
- Short-circuit, overload and overvoltage protected
- Operating hours counter
- Automatic colour wheel sequence or brightness sequence
- HCL (Human Centric Lighting) mode, automatic daytime colour temperature profile
- CT (Colour Transition) mode, automatic daytime colour profile
- Suitable for operation of emergency lighting systems with DC voltage
- Individual, group or central addressing
- 16 light scenes per DALI system
- Reading out of DALI device states via KNX, e.g. brightness or luminaire error
- Manual operation of the DALI groups, single devices or central (broadcast) separately for each DALI system
- Restraint or disabling functions
- Feedback of switching state and brightness value in bus and manual mode
- Collective feedback
- Central switching and dimming function
- Disabling function for each DALI group or each single device
- Separate switch-on and switch-off delay
- Staircase lighting timer with run-on time
- Online or offline project design of the DALI devices with ETS-DCA
- Standby switch-off of the DALI devices
- An individual DALI device of the same type can be exchanged during operation without software
- KNX Data Secure product
- Updateable with Insta ETS Service App
Specifications
| Rated voltage | AC 110 ... 240 V ~ |
| Mains frequency | 50 / 60 Hz |
| Power loss | max. 3 W |
| Ambient temperature | -5 ... +45 °C |
| Storage / Transport temperature | -25 ... +70 °C |
| Fitting width | 72 mm / 4 TE |
KNX |
|
| KNX Medium | TP 256 |
| Commissioning mode | S-Mode |
| Rated voltage KNX | DC 21 ... 32 V SELV |
| Current consumption KNX | 4,5 ... 5,0 mA |
| Connection type for bus | Anschlussklemme |
DALI |
|
| Rated voltage DALI | DC 16 V (typ.) |
| Output current | typ. 128 mA, max. 250 mA kurzzt. |
| DALI transmission rate | 1,2 kbit/s |
| DALI protocol | EN 62386 |
More products
