KNX Switching/Blind actuator 6/3gang

Referenznummer: 63791024

The KNX Switch actuator / Blind actuator receives telegrams from sensors or other controls via the KNX and switches electrical loads. The relay outputs of the actuator can be set in the ETS either to Venetian blind operation (2 relay outputs per channel) or alternatively (1 relay output per channel) to switching operation; mixed operation of these two operating modes is also possible on the device. In Venetian blind operation the actuator can be used with its relay contacts to control electrically driven Venetian blinds, shutters, awnings, roof windows, venting louvres or similar blinds/shutters that are suitable for mains voltage. Alternatively, the actuator in switching operation switches electrical loads, such as lighting systems or door openers.

Product features

Outputs can be operated manually, construction site mode
Manual switching between Venetian blind operation and switching operation without commissioning
Feedback in manual mode and in bus mode
Disabling of individual outputs manually or by bus
Status feedback (e. g. wind alarm)
KNX Data Secure product
Updateable with Insta ETS Service App

Characteristics switch operation

Operation as NO or NC contacts
Feedback function
Logic and restraint function 82402642 04.06.2024 4 / 15
Switching actuator 16 A / Blind actuator 16 A
Central switching functions with collective feedback
Time functions: switch-on delay, switch-off delay, staircase lighting timer with run-on time
Scene function
Operating hours counter

Characteristics Venetian blinds operation

Suitable for AC motors 110...230 V
Operating modes "Venetian blind with slats", "Roller shutter/awning", "Venting louvre/roof window"
Blind/shutter position directly controllable
Slat position directly controllable
Feedback of movement status, blind/shutter position and slat position
Forced position through higher-level controller
Safety function: 3 independent wind alarms, rain alarm, frost alarm
Sun protection function with heating/cooling operation
Disabling function (lock-out protection)
Scene function

Logic function characteristics

Logic gate
Transformer (conversion)
Disabling element
Comparator
Limit value switch

Specifications

Rated voltage	AC 230 / 240 V~
Mains frequency	50 / 60 Hz
Standby power	max. 0.2 W
Power loss	max. 1.2 W
Ambient temperature	-5 ... +45 °C
Storage / Transport temperature	-25 ... +70 °C
Length	approx. 48 mm
Width	approx. 45 mm
Height	approx. 20 mm
Zigbee
Radio frequency	2.400 ... 2.483 GHz
Transmission power	1 mW
Communication protocol	Zigbee 3.0 (router)
Bluetooth
Radio frequency	2.402 ... 2.480 GHz
Transmission power	max. 2.5 mW, Class 2
Transmitting range	typ. 10 m